English translation for "deformation path"
|
- 变形迹线
Related Translations:
- Example Sentences:
| 1. | It is the key to establish the control model for deformation path during the process of metal forming
而在金属成形过程的应变路径准确控制中，控制模型的建立是一关键。 | | 2. | The optimizing calculation is based on the reality deformation path and the calculation precise is control by the limit error
而修改后的切边轮廓再次进行翻边计算,并将其翻边轮廓与目标体轮廓进行比较。 | | 3. | Using the techniques of artificial neural networks and numerical simulation , a new approach of controlling deformation path based on identification of material parameter is proposed
本文所采用的应变路径控制模型是建立在材料物性参数m值实时辨识前提下以数值模拟和神经网络技术为基础的控制模型。 | | 4. | In the forming processes of mpf press and multi - step mpf , the restraint condition and deformation path of sheet metal were changed , and the forming defects were subdued , then the forming limitation was improved and large deformation could be achieved
采用多点压机及多道多点成形技术改变了约束方式及变形路迳，因而有效地抑制了成形缺陷的产生，提高板材的成形极限并实现了大变形量成形。 | | 5. | Furthermore by the experiment of tension and torsion test of thin walled tube on mts equipment , the experimental strain path was obtained and compared with target strain path . the results of comparison validated the correctness of the approach of controlling deformation path
其次，在正确识别材料物性参数m值的基础上进行了应变路径控制实验，通过实验过程中的实际应变路径与想要得到的目标应变路径的比较，验证了在正确识别材料物性参数前提下，基于数值模拟和神经网络的应变路径控制方法的正确性。 | | 6. | In this thesis it was proposed to simulate the drawing , trimming , flanging by using error - adjustment method . the initial trimming lines would be adjusted and optimized in the computer by adjusting error . if the shape error between the flanging boundary line and the target is larger than prescribed , the redundant area is subtracted from the initial blank by some amount of volume along the deformation path , and the insufficient volumes are added to the initial blank by the same amount
本文提出,利用基于变形路径的误差修正法( error - adjustment ) ,结合cae技术将对初始修边线的调试过程在计算机中进行模拟(包括拉延、修边、翻边、整形等)计算,通过控制翻边后零件成型边界与实际目标轮廓之间的尺寸误差来优化修边线,如果初始切边、翻边后的轮廓与目标体的边界存在较大偏差,则初始切边轮廓中多余部分单元将沿其变形路径以相同体积量被切除,不足部分则沿其变形路径以相同体积进行补偿。 |
- Similar Words：
- "deformation of wave" English translation, "deformation orientation" English translation, "deformation parameter" English translation, "deformation parameters test" English translation, "deformation particle" English translation, "deformation pattern" English translation, "deformation per unit of length" English translation, "deformation period" English translation, "deformation petrofabric" English translation, "deformation phase" English translation
|
|
|
